Measurement Specialties 9116 Manual de usuario descargar pdf (Pagina 98)

Measurement Specialties Inc. Model 9116 User’s Manual

Page 86 www.MEAS-SPEC.com

The Valve Position indexes (ii=12 and ii=0C) each have two states (00/01) that when combined

provide four (4) possible states of the C1/C2/C3/C4 internal valves. This “Logical Rotary

Switch” with four (4) positions is summarized in the following chart:

C1 Energized

C2 Not

(0C=01)

C2 Energized

C1 Not

(0C=00)

C3 Energized

C4 Not

(12=01)

PURGE

position

LEAK/CHECK

position

C4 Energized

C3 Not

(12=00)

CAL/RE-ZERO

position

RUN

position

Example:

● Send TCP/IP commands to Model 9116 module (via its connected socket)

setting the calibration valve to the CAL (or Re-Zero) position:

“w1200" (Set RUN/CAL valve position)

“w0C01” (Set CAL position)

Responses (both commands):

“A”

Note

If the programmer “knows” that the module is already in the RUN/CAL

valve mode, the first command above is optional. For more information,

see Figures 4.1 through 4.4 in Chapter 4.

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 145 146

Sin comentarios

Measurement Specialties 9116 Manual de usuario Pagina 98